[./index_enpag.html]
Info
Mail
Home
[./fiere_enpag.html]
[./catalogo_enpag.html]
[./listino_enpag.html]
[./contatto_enpag.html]
[./richinfo_enpag.html]
[./dove_siamo_enpag.html]
[./mappasitoenpag.html]
[./contesta_enpag.html]
[./hss_dmo5_co5_enpag.html]
[./din_hss_dmo5_enpag.html]
[./viteria_enpag.html]
[./din_hm_enpag.html]
[./hm_alu_enpag.html]
[./frizione_enpag.html]
[./nastro_enpag.html]
[./coltelli_enpag.html]
[./rivest_enpag.html]
[./ticn_enpag.html]
[./ticnred_enpag.html]
[./tialn_enpag.html]
[./tin_enpag.html]
[./tialcn_enpag.html]
[./silverfox_enpag.html]
[./flyer_enpag.html]
[./azienda_enpag.html]
Español
English
Français
Italiano
Deutsch
[./frizione_frpag.html]
[./frizione_depag.html]
[./frizionepag.html]
[./frizione_espag.html]
Friction saws for cutting pipe and profiles
[http://www.otomills.com/EN/default.asp]
[http://www.trennjaeger.info/default.html]
[ http://www.dreistern.com/eng/index.htm]
[http://www.abbeyintl.com/]
[http://www.mannesmann.com/]
[http://www.vai-seuthe.de/englisch/evaiseuthe.htm]
Julia produces friction saws for flying or static cutting of pipes and profiles in carbon steel such as ST37, ST52, etc., with hardness ranging from 300 and 600 N/mm². Our friction saw blades are manufactured with two different materials: chrome-vanadium steel (80CrV2 or 1.2235) and wolframium-molibdenum (73WCrMoV2 or 1.2604). Our available range encompasses all dimensions mounted on the most common macchines using the friction cutting technology, such as: Abbey Etna, Dreistern, Mannesmann, Oto Mills, MTM, Vai Seuthe, TRM, Trennijaeger. The friction saw blades, unlike cut-off circular saws (low RPM), run at a very high RPM, so generating in the cutting area very high temperatures bringing the material in plastic condition easing its cutting. The cutting is performed in a dry condition and the blade is cooled off only after the cutting; this lubrication lengthens the blade life.
Cerca
Friction to the service of cutting
[Web Creator] [LMSOFT]